| Abstract |
Acquisition of unsteady pressure using remote scanners can provide practical advantages over making the same measurements directly using flush-mounted pressure transducers. However, pneumatic distortion of the signal is introduced by the tubing between the sensing module and surface port. This typically limits the usefulness of such measurements to averaged, steady data only, restricting the application of pressure scanners for unsteady pressure measurements in wind-tunnel and flight-testing applications. In this work, unsteady pressure on the surface of a 1.75%-scale model of the NASA Space Launch System Block 1B Cargo vehicle was remotely measured using an electronic scanning pressure module at the NASA Langley Research Center 14-by 22-Foot Subsonic Tunnel. Subsequent reconstruction using an empirically tuned, Wiener-filtered inverse transfer function produced excellent agreement compared to nearby surface-mounted transducers within a usable bandwidth of approximately 500 Hz. Interactions between the launch vehicle and the support tower produced strong oscillations that were absent in the vehicle-alone configuration, and it is likely that the wake interaction leads to a resonant flow response when the launch tower is immediately downstream of the vehicle. |
| Authors |
Lee Mears  , Pourya Nikoueeyan , Michael Hind , John Strike , Marvin Perry , Benjamin Wimpenny , Jonathan Naughton 
|
| Journal Info |
American Institute of Aeronautics and Astronautics | Journal of Spacecraft and Rockets , vol: 61
, iss: 5
, pages: 1248 - 1257
|
| Publication Date |
6/25/2024 |
| ISSN |
0022-4650 |
Type |
article |
| Open Access |
closed
|
| DOI |
https://doi.org/10.2514/1.a36032 |
| Keywords |
Characterization (Score: 0.51813877) , Surface pressure (Score: 0.45514327) , Dynamic pressure (Score: 0.4208069)
|
