| Abstract |
Ceramics are of significant interest in gas turbine engines due to their low density and ability to withstand high temperatures. Increased cycle thermal efficiency and higher specific power output is possible by incorporating ceramic components that enable high turbine inlet temperatures and lower required cooling airflow. However, ceramics can be difficult and costly to form into the complex shapes used in gas turbine components, often requiring specialized multi-step processes. Furthermore, ceramic components in the hottest areas of a gas turbine, such as vanes or blade shroud seals, will still likely require cooling which is challenging to implement in conventional ceramic manufacturing approaches. Therefore, this study presents a multidisciplinary approach that investigates the design, fabrication and overall cooling effectiveness evaluation of additively manufactured (AM), polymer derived ceramic (PDC) turbine vanes. A thermo-mechanically optimized vane design was generated, ceramic additive manufacturing of the complex cooling configuration was developed, and quantification of the increase in overall cooling effectiveness was performed in a 1X scale, high-speed facility using infrared thermography. This study produced a PDC AM process, capable of printing complex internal cooling schemes in 1X scale turbine vanes. It was found that the optimized vane more than doubled the overall cooling effectiveness observed in the baseline design, which reasonably agreed with thermomechanical optimization model predictions. Additionally, the optimized ceramic vane outperformed an identical metal vane, in terms of area averaged cooling effectiveness, suggesting that ceramic vanes could operate at reduced coolant flow rates to achieve comparable levels of cooling performance. |
| Authors |
Andrew Fox , Stephen P. Lynch , Carl P. Frick  , Jason C. Young , Ray S. Fertig , Jennifer Hankins , Kyle Kuhn , Stephan A. Brinckmann
|
| Journal Info |
ASM International | Journal of Turbomachinery , pages: 1 - 18
|
| Publication Date |
12/7/2023 |
| ISSN |
0889-504X |
Type |
article |
| Open Access |
closed
|
| DOI |
https://doi.org/10.1115/1.4064226 |
| Keywords |
Thermal Barrier Coatings (Score: 0.545558) , Film Cooling (Score: 0.535402) , Gas Turbine Engines (Score: 0.531814) , Thermal Performance (Score: 0.521599) , Turbine (Score: 0.505583)
|
